Silicone keypad design: hardness, travel and feel

A keypad that feels crisp on the first press and mushy on the ten-thousandth is a design problem, not a moulding problem.

Three parameters decide the feel: compound hardness, key travel and the geometry of the web that connects the keys. Hardness is usually specified between 50 and 70 Shore A; a softer compound gives a longer, quieter stroke, a harder one gives a sharper break. Travel and web thickness then set the actuation force and how quickly the key returns.

Under the key, conductive carbon pills close the circuit on the PCB. Their position, height and flatness matter more than the dome shape: a pill that sits a few hundredths of a millimetre low will need a harder press, and one that is too high will trigger on a light touch and wear faster.

Legends and finish come last but are noticed first. Translucent silicone allows backlit icons; a matte coating hides fingerprints on appliance panels, while a PU coating resists oils and cleaning agents on industrial controllers. Tell us the environment and the expected press count, and we will propose hardness, travel and coating together.

Parameters we tune together

  • Compound hardness and web geometry for actuation force
  • Carbon pill height and flatness for reliable contact
  • Translucent legends, matte or PU coating for the panel
Back to company news

Have a part that needs a second opinion?

Send the drawing; a process engineer will review it and reply with a manufacturability note.